您的位置: 标准下载 » 国内标准 » 行业标准 »

HG/T 4301-2012 橡胶防霉性能测试方法

时间:2024-05-26 20:19:03 来源: 标准资料网 作者:标准资料网 阅读:9662
下载地址: 点击此处下载
基本信息
标准名称:橡胶防霉性能测试方法
英文名称:Test Method for determining Resistance of Rubber to Fungi
中标分类: 化工 >> 橡胶制品及其辅助材料 >> 橡胶制品综合
ICS分类: 橡胶和塑料工业 >> 橡胶
发布部门:中华人民共和国工业和信息化部
发布日期:2012-05-24
实施日期:2012-11-01
首发日期:
作废日期:
归口单位:全国橡胶与橡胶制品标准化技术委员会通用试验方法分会
起草单位:广东省微生物研究所、北京橡胶工业研究设计院、广州合成材料研究院有限公司
出版社:中国标准出版社
出版日期:2012-11-01
适用范围

本标准规定了橡胶材料及其制品的防霉性能试验和评价方法。本标准不涉及防霉产品安全性的评价。
本标准适用于橡胶材料及其制品。其他高分子材料及其制品也可参照执行。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 化工 橡胶制品及其辅助材料 橡胶制品综合 橡胶和塑料工业 橡胶
【英文标准名称】:Safetyofmachinery-Permanentmeansofaccesstomachinery-Part2:workingplatformsandwalkways-Amendment1.
【原文标准名称】:机械安全性.机械固定式专用通道.第2部分:工作台和通道.修改件1
【标准号】:NFE85-002/A1-2010
【标准状态】:现行
【国别】:法国
【发布日期】:2010-06-01
【实施或试行日期】:2010-06-19
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:通道;检查孔;通路;可及性;建筑物面积;电气安全;设备安全;下沉;跳板;栅格;扶手;工业设施;工业机械;工业设备;工业;曲柄支托板;导程角;负荷测量;负荷;机械单元;机械;机械工程;职业安全;操作台;设备;平台;围栏;安全;防滑安全;防倾斜安全;安全距离;安全工程;机械安全性;安全要求;壁脚板;阻滑;规范(验收);工作架;楼梯;固定的;阶梯壁架;踏阶;试验;走道;工作场所;工作平台;工作场所安全
【英文主题词】:Access;Accessopenings;Accessroads;Accessibility;Areasofbuildings;Electricalsafety;Equipmentsafety;Fall;Gangways;Grilles;Hand-rails;Industrialfacilities;Industrialmachines;Industrialplant;Industries;Kneegripboards;Leadangle;Loadmeasurement;Loading;Machineunits;Machines;Mechanicalengineering;Occupationalsafety;Operatingstations;Plant;Platforms;Railings;Safety;Safetyagainststepping;Safetyagainsttilting;Safetydistances;Safetyengineering;Safetyofmachinery;Safetyrequirements;Skirtingboards;Slide-blocking;Specification(approval);Staging;Stairs;Stationary;Stepledges;Steps;Testing;Walkways;Workspaces;Workingplatforms;Workplacesafety
【摘要】:
【中国标准分类号】:J04
【国际标准分类号】:13_110
【页数】:10P;A4
【正文语种】:其他


MIL-DTL-17H, DETAIL SPECIFICATION: CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERATION SPECIFICATION FOR (04 AUG 2006) [SUPERSEDING MIL-C-17G]., This specification covers flexible and semirigid cables with solid and semisolid dielectric cores, with single, dual and twin inner conductors. Cables covered by this specification are primarily intended for use as transmission lines to conduct energy in a simple power transfer continuously or intermittently. In general, these cables are designed for low-loss, stable operation from the relatively low frequencies through the higher frequencies in the microwave and radar regions of the frequency spectrum. Cables may also be used as circuit elements, delay lines or impedance matching devices. These cables are supplied under a reliability assurance program as specified in section 3.